volume_backwards_scattering_coefficient_of_radiative_flux_in_air_due_to_dried_aerosol_particles
The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeds pi/2 radians. A scattering_angle should not be specified with this quantity. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. Radiative flux is the sum of shortwave and longwave radiative fluxes. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (relative humidity less than 40 per cent) has not necessarily been reached. To specify the relative humidity at which the sample was measured, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.Aliases for this term
volume_backwards_scattering_coefficient_in_air_due_to_dried_aerosol_particles
The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The spherical backwards scattering coefficient refers to the redirection of an incident light beam into the rearward hemisphere relative to the incident beam by a component in the reference volume. "Spherical" means that the coefficient is integrated over the rearward hemisphere, distinct from volume_backwards_scattering_coefficient which isn't integrated. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (RH < 40%) hasn't necessarily been reached. To specify the relative humidity at which the property applies, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.volume_backwards_scattering_coefficient_in_air_due_to_dried_aerosol_particles
The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (RH < 40%) hasn't necessarily been reached. To specify the relative humidity at which the property applies, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.volume_backwards_scattering_coefficient_in_air_due_to_dried_aerosol_particles
The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeds pi/2 radians. A scattering_angle should not be specified with this quantity. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (RH < 40%) hasn't necessarily been reached. To specify the relative humidity at which the property applies, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.volume_backwards_scattering_coefficient_in_air_due_to_dried_aerosol_particles
The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeds pi/2 radians. A scattering_angle should not be specified with this quantity. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (RH < 40%) hasn't necessarily been reached. To specify the relative humidity at which the quantity described by the standard name applies, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.volume_backwards_scattering_coefficient_in_air_due_to_dried_aerosol_particles
The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeds pi/2 radians. A scattering_angle should not be specified with this quantity. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (relative humidity less than 40 per cent) has not necessarily been reached. To specify the relative humidity at which the sample was measured, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.volume_backwards_scattering_coefficient_in_air_due_to_dried_aerosol_particles
The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeds pi/2 radians. A scattering_angle should not be specified with this quantity. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (RH < 40%) has not necessarily been reached. To specify the relative humidity at which the sample was measured, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.This term is not aliased.