Term: change_over_time_in_sea_water_temperature

Unit: K

Unit ref: UPKA

AMIP:

GRIB:

"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate.Sea water temperature is the in situ temperature of the sea water. To specify the depth at which the temperature applies use a vertical coordinate variable or scalar coordinate variable. There are standard names for sea_surface_temperature, sea_surface_skin_temperature, sea_surface_subskin_temperature and sea_surface_foundation_temperature which can be used to describe data located at the specified surfaces. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.

Term: change_over_time_in_sea_water_temperature

Unit: K

Unit ref: UPKA

AMIP:

GRIB:

"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate.Sea water temperature is the in situ temperature of the sea water. To specify the depth at which the temperature applies use a vertical coordinate variable or scalar coordinate variable. There are standard names for sea_surface_temperature, sea_surface_skin_temperature, sea_surface_subskin_temperature and sea_surface_foundation_temperature which can be used to describe data located at the specified surfaces. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990. It is strongly recommended to include a units_metadata attribute.

Term: change_over_time_in_sea_water_temperature

Unit: K

Unit ref: UPKA

AMIP:

GRIB:

"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate.Sea water temperature is the in situ temperature of the sea water. To specify the depth at which the temperature applies use a vertical coordinate variable or scalar coordinate variable. There are standard names for sea_surface_temperature, sea_surface_skin_temperature, sea_surface_subskin_temperature and sea_surface_foundation_temperature which can be used to describe data located at the specified surfaces. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990. In order to convert the units correctly, it is essential to know whether a temperature is on-scale or a difference. Therefore this standard strongly recommends that any variable whose units involve a temperature unit should also have a units_metadata attribute to make the distinction. units_metadata="temperature: difference" means that the temperature quantity is the difference between two temperatures, so the origin of the scale is irrelevant, and only the unit of measure matters. It is strongly recommended to include the attribute units_metadata="temperature: difference".

Term: change_over_time_in_sea_water_temperature

Unit: K

Unit ref: UPKA

AMIP:

GRIB:

"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate.Sea water temperature is the in situ temperature of the sea water. To specify the depth at which the temperature applies use a vertical coordinate variable or scalar coordinate variable. There are standard names for sea_surface_temperature, sea_surface_skin_temperature, sea_surface_subskin_temperature and sea_surface_foundation_temperature which can be used to describe data located at the specified surfaces. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990. It is strongly recommended that a variable with this standard name should have the attribute units_metadata="temperature: difference", meaning that it refers to temperature differences and implying that the origin of the temperature scale is irrelevant, because it is essential to know whether a temperature is on-scale or a difference in order to convert the units correctly (cf. https://cfconventions.org/cf-conventions/cf-conventions.html#temperature-units).