798OAE3Z	number_concentration_of_ozone_molecules_in_air		"Number concentration" means the number of particles or other specified objects per unit volume. The chemical formula for ozone is O3. The IUPAC name for ozone is trioxygen.	I
3HWMM33G	ocean_sigma_z_coordinate		See Appendix D of the CF convention for information about dimensionless vertical coordinates.	I
PLN061W7	northward_flood_water_velocity		A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). Flood water is water that covers land which is normally not covered by water.	I
INNVXAOH	flood_water_duration_above_threshold		The  quantity with standard name flood_water_duration_above_threshold is the time elapsed between the instant when the flood depth first rises above a given threshold until the time falls below the same threshold for the last time at a given point in space. If a threshold is supplied, it should be specified by associating a coordinate variable or scalar coordinate variable with the data variable and giving the coordinate variable a standard name of flood_water_thickness. The values of the coordinate variable are the threshold values for the corresponding subarrays of the data variable. If no threshold is specified, its value is taken to be zero. Flood water is water that covers land which is normally not covered by water.	I
VHPVF15J	time_of_maximum_flood_depth		The quantity with standard name time_of_maximum_flood_depth is the time elapsed between the breaking of a levee (origin of flood water simulation) and the instant when the flood depth reaches its maximum during the simulation for a given point in space. Flood water is water that covers land which is normally not covered by water.	I
CALTT1MR	eastward_flood_water_velocity		A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Flood water is water that covers land which is normally not covered by water.	I
XYA93BA0	time_when_flood_water_falls_below_threshold		The quantity with standard name time_when_flood_water_falls_below_threshold is the time elapsed between the breaking of a levee (origin of flood water simulation) and the instant when the depth falls below a given threshold for the last time, having already risen to its maximum depth, at a given point in space. If a threshold is supplied, it should be specified by associating a coordinate variable or scalar coordinate variable with the data variable and giving the coordinate variable a standard name of flood_water_thickness. The values of the coordinate variable are the threshold values for the corresponding subarrays of the data variable. If no threshold is specified, its value is taken to be zero. Flood water is water that covers land which is normally not covered by water.	I
1O5UZT5I	flood_water_speed		Speed is the magnitude of velocity. Flood water is water that covers land which is normally not covered by water.	I
555CMGNI	ground_level_altitude		The ground_level_altitude is the geometric height of the upper boundary of the solid Earth above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.	I
F4SYKX2M	flood_water_thickness		The flood_water_thickness is the vertical distance between the surface of the flood water and the surface of the solid ground, as measured at a given point in space. The standard name ground_level_altitude is used for a data variable giving the geometric height of the ground surface above the geoid. "Flood water" is water that covers land which is normally not covered by water.	I
QHP3LD5T	time_when_flood_water_rises_above_threshold		The quantity with standard name time_when_flood_water_rises_above_threshold is the time elapsed between the breaking of a levee (origin of flood water simulation) and the instant when the depth first rises above a given threshold at a given point in space. If a threshold is supplied, it should be specified by associating a coordinate variable or scalar coordinate variable with the data variable and giving the coordinate variable a standard name of flood_water_thickness. The values of the coordinate variable are the threshold values for the corresponding subarrays of the data variable. If no threshold is specified, its value is taken to be zero. Flood water is water that covers land which is normally not covered by water.	I
ISIW059G	sea_water_potential_temperature_at_sea_floor		Potential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure. The potential temperature at the sea floor is that adjacent to the ocean bottom, which would be the deepest grid cell in an ocean model.	I
PRLBXY56	ultraviolet_index_assuming_overcast_sky		The "Ultraviolet Index" (UVI) is a measure of the amount of solar ultraviolet radiation that reaches the surface of the earth depending on factors such as time of day and cloud cover. It is often used to alert the public of the need to limit sun exposure and use sun creams to protect the skin. Each point on the Index scale is equivalent to 25 mW m-2 of UV radiation (reference: Australian Bureau of Meteorology, http://www.bom.gov.au/uv/about_uv_index.shtml). The UVI range is expressed as a numeric value from 0 to 20 and sometimes graphically as bands of color indicating the attendant risk of skin damage. A UVI of 0-2 is described as 'Low' (represented graphically in green); a UVI of 11 or greater is described as "Extreme" (represented graphically in purple). The higher the UVI, the greater the potential health risk to humans and the less time it takes for harm to occur. A phrase "assuming_condition" indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "Overcast" means a fractional sky cover of 95% or more when at least a portion of this amount is attributable to clouds or obscuring phenomena (such as haze, dust, smoke, fog, etc.) aloft. (Reference: AMS Glossary: http://glossary.ametsoc.org/wiki/Main_Page). Standard names are also defined for the quantities ultraviolet_index and ultraviolet_index_assuming_clear_sky.	I
03TIMQNC	pressure_at_effective_cloud_top_defined_by_infrared_radiation		The "effective cloud top defined by infrared radiation" is (approximately) the geometric height above the surface that is one optical depth at infrared wavelengths (in the region of 11 micrometers) below the cloud top that would be detected by visible and lidar techniques. Reference: Minnis, P. et al 2011 CERES Edition-2 Cloud Property Retrievals Using TRMM VIRS and Terra and Aqua MODIS Data x2014; Part I: Algorithms IEEE Transactions on Geoscience and Remote Sensing, 49(11), 4374-4400. doi: http://dx.doi.org/10.1109/TGRS.2011.2144601.	I
WYB1LR85	ultraviolet_index		The "Ultraviolet Index" (UVI) is a measure of the amount of solar ultraviolet radiation that reaches the surface of the earth depending on factors such as time of day and cloud cover. It is often used to alert the public of the need to limit sun exposure and use sun creams to protect the skin. Each point on the Index scale is equivalent to 25 mW m-2 of UV radiation (reference: Australian Bureau of Meteorology, http://www.bom.gov.au/uv/about_uv_index.shtml). The UVI range is expressed as a numeric value from 0 to 20 and sometimes graphically as bands of color indicating the attendant risk of skin damage. A UVI of 0-2 is described as 'Low' (represented graphically in green); a UVI of 11 or greater is described as "Extreme" (represented graphically in purple). The higher the UVI, the greater the potential health risk to humans and the less time it takes for harm to occur. To specify the amount of cloud cover at which the data variable applies, provide a scalar coordinate variable with standard name "cloud_area_fraction". Standard names are also defined for the quantities ultraviolet_index_assuming_clear_sky and ultraviolet_index_assuming_overcast_sky.	I
AJFZGIRG	depth_below_sea_floor		"Depth_below_X" means the vertical distance below the named surface X.	I
CFSN0183	tendency_of_air_temperature_due_to_radiative_heating		The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.	M
MXPA4R9T	ultraviolet_index_assuming_clear_sky		The "Ultraviolet Index" (UVI) is a measure of the amount of solar ultraviolet radiation that reaches the surface of the earth depending on factors such as time of day and cloud cover. It is often used to alert the public of the need to limit sun exposure and use sun creams to protect the skin. Each point on the Index scale is equivalent to 25 mW m-2 of UV radiation (reference: Australian Bureau of Meteorology, http://www.bom.gov.au/uv/about_uv_index.shtml). The UVI range is expressed as a numeric value from 0 to 20 and sometimes graphically as bands of color indicating the attendant risk of skin damage. A UVI of 0-2 is described as 'Low' (represented graphically in green); a UVI of 11 or greater is described as "Extreme" (represented graphically in purple). The higher the UVI, the greater the potential health risk to humans and the less time it takes for harm to occur. A phrase "assuming_condition" indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. Standard names are also defined for the quantities ultraviolet_index and ultraviolet_index_assuming_overcast_sky.	I
SXTKCAH2	sea_surface_wind_wave_from_direction		Wind waves are waves on the ocean surface. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name "upward_air_velocity".) "from_direction" is used in the construction X_from_direction and indicates the direction from which the velocity vector of X is coming.	I
GE3BJ3SJ	net_rate_of_absorption_of_shortwave_energy_in_ocean_layer		"shortwave" means shortwave radiation. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Net absorbed radiation is the difference between absorbed and emitted radiation.	I
6OP5LKSX	concentration_of_colored_dissolved_organic_matter_in_sea_water_expressed_as_equivalent_mass_fraction_of_quinine_sulfate_dihydrate		The quantity with standard name concentration_of_colored_dissolved_organic_matter_in_sea_water_expressed_as_equivalent_mass_fraction_of_quinine_sulfate_dihydrate is also commonly known as Chromophoric Dissolved Organic Matter (CDOM). CDOM plays an important role in the carbon cycling and biogeochemistry of coastal waters. It occurs naturally in aquatic environments primarily as a result of tannins released from decaying plant and animal matter, which can enter coastal areas in river run-off containing organic materials leached from soils. When present in high concentrations, it imparts a brown or yellowish color to water. Its presence can negatively impact fish populations by reducing dissolved oxygen concentrations to harmful levels and by releasing nutrients and metals that contaminate the water. Increased understanding of the role of CDOM will further our ability to manage and protect coastal ecosystems. Sensors are commonly calibrated against a 100 parts per billion (ppb) quinine sulfate dihydrate solution, a fluorescent reference standard commonly used with CDOM sensors. CDOM sensors therefore report in "QSDE" (quinine sulfate dihydrate equivalents). It is important to note, however, that CDOM concentrations in QSDE are not necessarily equivalent to the in situ CDOM concentrations in ppb.	I
HDDAAAHH	low_type_cloud_area_fraction		Low type clouds are: Stratus, Stratocumulus, Cumulus, Cumulonimbus. "X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". X_type_cloud_area_fraction is generally determined on the basis of cloud type, though Numerical Weather Prediction (NWP) models often calculate them based on the vertical location of the cloud.	M
7WW6WT3B	mole_concentration_of_zooplankton_expressed_as_nitrogen_in_sea_water		Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated in terms of B alone, neglecting all other chemical constituents of A. Standard names also exist for the mole concentration of a number of components that make up the total zooplankton population, such as mesozooplankton, and microzooplankton.	I
ADHIFDDC	high_type_cloud_area_fraction		High type clouds are: Cirrus, Cirrostratus, Cirrocumulus. "X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". X_type_cloud_area_fraction is generally determined on the basis of cloud type, though Numerical Weather Prediction (NWP) models often calculate them based on the vertical location of the cloud.	M
1C3HWKK2	ice_cloud_area_fraction		"X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer.	I
FFIBGAFG	medium_type_cloud_area_fraction		Middle type clouds are: Altostratus, Altocumulus, Nimbostratus. "X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". X_type_cloud_area_fraction is generally determined on the basis of cloud type, though Numerical Weather Prediction (NWP) models often calculate them based on the vertical location of the cloud.	M
VPQ3SQPJ	volume_extinction_coefficient_in_air_due_to_cloud_particles		The volume extinction coefficient is the fractional change of radiative flux per unit path length. Extinction is the sum of absorption and scattering, sometimes called "attenuation". "Extinction" is the term most commonly used at optical wavelengths whereas "attenuation" is more often used at radio and radar wavelengths. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Cloud particles" means suspended liquid or ice water droplets. A coordinate of radiation_wavelength or radiation_frequency should be included to specify either the wavelength or frequency.	I
95JF7EN0	ice_cloud_area_fraction_in_atmosphere_layer		"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be "model_level_number", but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover".	I
USFDMNK3	sea_surface_swell_wave_from_direction		Swell waves are waves on the ocean surface. "from_direction" is used in the construction X_from_direction and indicates the direction from which the velocity vector of X is coming.	I
1FM8RTOH	height_at_effective_cloud_top_defined_by_infrared_radiation		The "effective cloud top defined by infrared radiation" is (approximately) the geometric height above the surface that is one optical depth at infrared wavelengths (in the region of 11 micrometers) below the cloud top that would be detected by visible and lidar techniques. Reference: Minnis, P. et al 2011 CERES Edition-2 Cloud Property Retrievals Using TRMM VIRS and Terra and Aqua MODIS Data x2014; Part I: Algorithms IEEE Transactions on Geoscience and Remote Sensing, 49(11), 4374-4400. doi: http://dx.doi.org/10.1109/TGRS.2011.2144601.	I
91ED54E3	liquid_water_cloud_area_fraction		"X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. The chemical formula for water is H2O.	I
BHMHISG2	water_volume_transport_in_river_channel		The water flux or volume transport in rivers is the amount of water flowing in the river channel and flood plain. "Water" means water in all phases.	I
LO6V9WKR	air_temperature_at_effective_cloud_top_defined_by_infrared_radiation		The "effective cloud top defined by infrared radiation" is (approximately) the geometric height above the surface that is one optical depth at infrared wavelengths (in the region of 11 micrometers) below the cloud top that would be detected by visible and lidar techniques. Reference: Minnis, P. et al 2011 CERES Edition-2 Cloud Property Retrievals Using TRMM VIRS and Terra and Aqua MODIS Data x2014; Part I: Algorithms IEEE Transactions on Geoscience and Remote Sensing, 49(11), 4374-4400. doi: http://dx.doi.org/10.1109/TGRS.2011.2144601.	I
RH61M1BL	liquid_water_cloud_area_fraction_in_atmosphere_layer		"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be "model_level_number", but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". The chemical formula for water is H2O.	I